Complete Guide to Pair JBL Speakers with iPhone

Going by the terms and conditions of Apple Media Services, which state that you can use external speakers to make or take calls, stream music and films, and more. Meanwhile, in this guide, we will be considering a guide to link JBL Speakers to iPhone devices.

Apple customers are aware that the iPhones do not support the 3.5mm headphone jack. Therefore, cable connections to any sort of JBL Bluetooth speaker are not possible. The Bluetooth option, however, always sticks out.

But what if you could elevate that listening experience by pairing your iPhone with a superior JBL speaker? The sound would be richer and more complex, in addition to being louder and more immersive.

Another useful feature is Siri integration, although it is only accessible with the latest version of JBL speakers from the Xtreme, Pulse, Charge, and Flip series.

Siri can play your preferred music, increase the volume, or move on to the next song. In that case, let’s get right to the fundamentals of how you can do it now that you are aware of the advantages of pairing your iPhone with a JBL speaker.

Instructions for Connecting JBL Speakers to An iPhone

Make sure to read all the way to the end since you will find everything related to how to connect JBL Speakers to an iPhone in this article.

How to Connect an iPhone to an External Bluetooth Device

According to the explanation on Apple’s official support website, pairing Bluetooth speakers, in this case, is made quite apparent.

It is incredibly simple to connect an iPhone to external JBL speakers. You can proceed once you have completed these 3 steps.

Step 1 ====> Navigate to the Settings menu, and click the symbol for the Bluetooth settings page. Drag the top circle until it turns green to activate it if it is off.

Step 2 ====> The JBL speaker you own should be placed close to the iPhone. Allow iPhone some time to read the external device while you wait.

If it still isn’t showing up, try turning Bluetooth on and off multiple times until the JBL’s name appears under Other Devices.

Step 3 ====> Tap on it once more and wait for the JBL speaker to connect before moving on. The speaker might occasionally inquire about your PIN or passcode. You are done when you write the code down.

How to Connect JBL Speaker to iPhone

We will use a JBL Flip 4 for this process. To connect your JBL speaker to your iPhone, follow these steps while it is unplugged (the power button is dark).

Since we don’t have an iPhone to take screenshots from, we are using an iPad Air tablet for this demonstration. The setup pages, however, are largely the same. The process is therefore essentially the same.

Step 1 ====> Go to the Home Screen of your iPhone

The iPhone’s Home screen can be accessed by pressing the Home button.

Step 2 ====> Locate the Settings App

As seen in the next image, we located ours on the second page of the iOS home screen.

Step 3 ====> Activate the Settings App

Select the Settings application icon. The first page of the iPhone’s settings is then displayed, as can be seen in the next step.

Step 4 ====> Continue with How to Connect JBL Speaker to iPhone by going to the Bluetooth Settings Page.

The screen that shows our Bluetooth settings looks like this. We have Bluetooth turned on here, as you can see.

However, because the speaker is currently off, it is not visible in the list of devices. Additionally, we can’t see it because we haven’t previously associated this iOS device with this speaker.

See this as displayed in the following list of Bluetooth devices that have already been paired.

Step 5 ====> Turn On your JBL Speaker

Most JBL speakers may be turned on by swiftly pushing their Power button. Then the speaker turns on.

However, the speaker will not immediately connect because the iPhone is unaware of it. The power switch’s light, which turns ON to indicate this unpaired status, glows solid white.

Step 6 ====> Enable the Pairing Mode on your JBL Bluetooth Speaker

Put your JBL speaker in Bluetooth discovery mode so that you can see it on your iPhone (also known as Pairing Mode). Locate and press the Bluetooth button on the speakers.

The Bluetooth Discovery Mode button causes the speaker to repeatedly play a single guitar note when pressed. The Power button also switches from having a steady white glow to one that flashes blue.

Step 7 ====> To Continue, Locate your JBL Flip 4 on your Phone. Connecting a JBL Speaker to an iPhone

Step 8 ====> Link to your JBL Speaker

In the Bluetooth Devices list’s Other Devices section, tap the speaker that is displayed. The speaker (in this case, gadgetsright’s Flip 4) and your iPhone then pair. The Bluetooth Settings screen on the iPhone then takes on the following appearance.

Step 9 ====> That is all, Connecting a JBL Speaker to an iPhone is Done

Your JBL wireless speaker and iPhone have now been successfully paired. You can now use the speaker to play music.

Additionally, certain models, like the Flip 4, allow you to make phone calls and listen to them through this speaker.

What Can You Do if Bluetooth Accessory isn’t Pairing with JBL Speakers?

====> Put the iPhone and JBL speakers next to one another. The wireless range capability of JBL could be the issue.

====> Because two iPhones cannot connect to a single JBL speaker simultaneously, see if the JBL speaker is connected to another device.

====> To determine whether the problem is with your iPhone or the JBL speaker, try pairing the JBL with another smart device.

====> Frequently turn the Bluetooth gadget on and off.

====> If JBL mentioned iPhone compatibility, check that out.

====> Reboot your iPhone. The problem could occasionally be internal.

====> Most JBL speakers come with a specific App. Check the app by opening it.

====> Verify whether the JBL speaker’s battery is still good.

Popular Post

Connect JBL Speakers to Laptop and Computer

How to Connect JBL Speakers Together?

How Do I Reset JBL Speaker?

Oclean X Pro Electric Toothbrush Review

How to Pair Onn Wireless Earbuds

Improve Oculus Quest 2 Battery Life

How to Check CPU Temperature on Windows 11

How many JBL Speakers can you Connect to One iPhone?

Theoretically, one iPhone can simultaneously link up to seven JBL speakers. However, depending on your iPhone model and speaker kind, that number may only be 2 to 4.

But also bear in mind that not all JBL speakers support interconnectivity. Three different JBL speaker kinds exist. Additionally, speakers of the same type can only be linked together.

Here is a quick guide on which models you may connect together to aid you:

====> JBL PartyBoost: JBL Flip 5 as well as JBL Pulse 4.

====> JBL Clip 2, JBL Pulse 2, JBL Flip 3, and JBL Charge 3 are all part of JBL Connect.

====> JBL Boombox, JBL Xtreme 2, JBL Pulse 3, JBL Flip 4, and JBL Charge 4 are all part of JBL Connect+.

You must hit the connect button on each speaker in order to connect them. The JBL speakers can now recognize one another thanks to this.


In conclusion, I can state that Apple has developed its own technology system based on all the information provided above on the Bluetooth connectivity between the iPhone and JBL speakers. Since the manufacturer didn’t provide a 3.5mm headphone connector, you can’t connect wired.

The only connection type available is Bluetooth. Consequently, connecting using Bluetooth is quick and easy. Drag the circle in the settings and wait for the iPhone to detect the JBL speaker. That’s how easy it is.

Occasionally, problems could occur if this straightforward method is unsuccessful. Then, you must either attempt restarting the iPhone or JBL speaker from scratch or try repeating the same procedure a few times.

There are other factors to take into account, the most important of which is whether the iPhone is compatible with your JBL speaker (which is rare, almost all of them are iPhone compatible) If it is, determine the wireless range or battery life (keep both devices close to each other).

Alternately, use a different iPhone to pinpoint the exact location of the problem on your JBL speaker or iPhone before contacting Apple customer care. They will undoubtedly find a solution.

Leave a Comment