Tecno Y2: Secret Codes For Tecno Y2 You Need Top Know

tecno Y2 secret codes

Tecno Y2 is one of the smallest Tecno Android devices I love so much. It easy to use and performing very well. Therefore, due to its popularity among users, here we place before you some of the secret code that is very useful on Tecno Y2.

*#06# ====> IMEI number

*#*#273282*255*663282*#*#* ====> Immediate backup of all media files

WLAN, GPS and Bluetooth Test Codes:

*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* ====> WLAN test (Use “Menu” button to start various tests)

*#*#232338#*#* ====> It shows WiFi MAC address MAC (Media Access Control), the address is a globally unique identifier assigned to network devices, and therefore it is often referred to as hardware or physical address. MAC addresses are 6-byte (48-bits) in length and are written in MM:MM:MM:SS:SS:SS format.

The first 3-bytes are the ID number of the manufacturer, which is assigned by an Internet standards body. The second 3-bytes are the serial number assigned by the manufacturer.

*#*#1472365#*#* ====> GPSGPS is a satellite navigation system used to determine the ground position of an object. GPS technology was first used by the United States military in the 1960s and expanded into civilian use over the next few decades. test

*#*#1575#*#* ====> This code is used for a more advanced GPS test

*#*#232331#*#* ====> Bluetooth test is all about wireless communication. These days, we use Bluetooth technology everywhere from headsets, which allow us to wirelessly operate our phones, to fitness devices that continuously log our health statistics and transmit them to our personal devices (phones, tablets, computers etc).

*#*#232337#*# ====> Shows Bluetooth device address in Tecno Y2

*#*#8255#*#* ====> This code can be used to launch GTalk Service Monitor. Gtalk Service Monitor and play services monitor are developer options to let you examine and debug the push connections to google talk and google play services. Below these, the “restore default heartbeats” button lets you bring back the original heartbeat exchange settings if you have to. The final button is about making a donation to the developer of this convenient app. and that is it! now, you are left to experiment with the data and wi-fi settings until you land the most comfortable intervals for you.

*#*#36245#*#* ====> Access email debug information.

Call Forwarding (you have to order the service from the operator)

##002# ====> Cancel all diverts

##004# ====> Cancel all conditional call forwarding

**004* phone number # ====> Activate all conditional call forwarding

Unconditional Call Forwarding (Call Forward All)

###21 ====> Switch off and deactivate

#21# ====> Deactivate

**21*phone number# ====> Enable and Activate

*21# ====> Activate

*#21# ====> Check the condition

Diversion in Case of “No Answer”

###61 ====> Switch off and deactivate

#61# ====> Deactivate

**61* phone number# ====> Enable and Activate

*61# ====> Activate

*#61# ====> Check the condition

Barring of All Outgoing Calls

**33*password# ====> Activate

#33*password# ====> Deactivate

*#33# ====> Check the condition

Barring of All Calls

**330*password# ====> Activate

#330*password# ====> Deactivate

*#330# ====> Check the condition

Barring of All Outgoing Calls

**333*password# ====> Activate

#333*password# ====> Deactivate

*#333# ====> Check the condition

Barring of All Incoming Calls

**353*password# ====> Activate

#353*password# ====> Deactivate

*#353# ====> Check the condition

Barring of all Outgoing International Calls

**331*password# ====> Activate

#331*password# ====> Deactivate

*#331# ====> Check the condition

Barring all Incoming Calls When Roaming

**351*password# ====> Activate

#351*password# ====> Deactivate

*#351# ====> Check the condition

Call Waiting (you have to order the service from the operator)

*43# ====> Activate

#43# ====> Deactivate

*#43# ====> Check the condition

Transfer Your Phone Number (Anti ANI)

#30#phone number ====> Block

*30#phone number ====> Allow

*#30# -====>Check the condition

Show Phone Number of The Caller  (ANI)

#77# ====> Block

*77# ====> Allow

*#77# ====> Check the condition

Smart Menu

GP ====> *111#

Rob ====> *140#

Banglalink ====> *789#

Codes to Launch Various Factory Tests:

*#*#0283#*#* ====> Packet Loopback

*#*#2664#*#* ====> Touch screen test

*#*#0*#*#* ====> LCD display test

*#*#0588#*#* ====> Proximity sensor test

*#*#0673#*#* OR *#*#0289#*#* ====> Melody test

*#*#3264#*#* ====> RAM version Tecno Y2

*#*#0842#*#* ====> Device test (Vibration test and BackLight test)

*#*#4636#*#* ====> This code can be used to get some interesting information about Tecno Y2 and battery. It shows following 4 menus on screen:

====> Phone information
====> Battery History
====> Battery information
====> Usage statistics

*#*#7780#*#* ====> By taping this caode, you try to berform data factory reset. The code erase the following function:
====> System and application data settings
====> Downloaded application
====> Every Google account stored in your phone

The code will not have effect on the following

====> SD card files will be intact, such as photo, music, videos among others
====> Current system software and bundled application

NOTE: Once you give this code, you get a prompt screen asking you to click on “Reset phone” button. So you get a chance to cancel your operation.

*2767*3855# ====> Think twice before you give this code. This code is used for factory format. It will remove all files and settings including the internal memory storage. It will also reinstall the phone firmware.

NOTE: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. That is why you need to think twice before giving this code.

Codes to Get Firmware Version Information:

*#*#2222#*#* ====> FTA HW Version

*#*#4986*2650468#*#* ====> PDA, Phone, H/W, RFCallDate

*#*#1111#*#* ====> FTA SW Version (1234 in the same code will give PDA and firmware version)

*#12580*369# ====> Software and hardware info

*#*#1234#*#* OR *#1234# ====> PDA and Phone firmware information

*#9090# ====> Diagnostic configuration in Tecno Y2

*#*#44336#*#* ====> PDA, Phone, CSCThe Customer Service Code (CSC).

GSM codes for Tecno Y2

Change PIN1: ** 04 * then enter the PIN old, and twice a new PIN.

Change PIN2: ** 042 * then enter the old The PIN2, and twice the new PIN2.

Unlock SIM-card (PIN): ** 05 * then enter the PUK and new PIN twice

Unlock SIM-card (PIN2): ** 052 * then enter the PUK2 and new PIN2 twice

Setting the call time until the call forwarding option “no answer”

When installing forwarding on “no answer” you can set the time in seconds that the system allows you to hook. If during this time you have not picked up the phone, the incoming call will be diverted.

Example: ** 61 * + ** 709576617601234 # 30 ====> set the waiting time of 30 seconds

Set timeout: ** 61 * Phone Number ** N #, N ====> 5..30 (seconds)

## 61 # ====>Remove the previous installation

Diversion in Case of “Not Available”

# ## 62 ====> Switch off and deactivate

# 62 # ====> Deactivate

** 62 *phone number# ====> Enable and Activate

* 62 # ====> Activate

* # 62 # ====> Check the condition

Diversion in Case of “Busy”

###67 ====> Switch off and deactivate

#67# ====> Deactivate

**67*phone number# ====> Enable and Activate

*67# ====> Activate

*#67# ====> Check the condition

Call Barring (you have to order the service from the operator)
Change the password for all bans (default – 0000)

** 03 * 330 * old password * new password * new password #

*#*#34971539#*#* ====> This code is used to get information about phone camera. It shows following 4 menus:

====> Update camera firmware in image (Don’t try this option)

====> Update camera firmware in SD card

====> Get camera firmware version in Tecno Y2

====> Get firmware update count

NOTE: Never use the first option otherwise your phone camera will stop working and you will need to take Tecno Y2 to service center to reinstall camera firmware.

*#*#7594#*#* ====> This one is favorite one. This code can be used to change the “End Call / Power” button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.

*#*#225#*#* ====> Events calendar.

*#*#426#*#* ====> Debug information for Google Play service. With Google Play services, your Android app can take advantage of the latest, Google-powered features such as Maps, Google+, and more, with automatic platform updates distributed as an APK through the Google Play store.

*#*#759#*#* ====> Access Google Partner setup (Rlz debug interface).

*#872564# ====> USB logging control

*#9900# ====> System dump mode Tecno Y2

*#*#97#*#* ====> Language and Keyboard settings in Tecno Y2

*#*#46*#*# ====> Reset Sim in Tecno Y2

*#301279# ====> HSDPA HSDPA means “High Speed Downlink Packet Access” and is a technique used in the UMTS mobile communication system, the download speeds of currently 3.6 Mbit/s to 7.2 Mbit/s.

*#7465625# ====> View phone lock status

*7465625*638*Code# ====> Enables Network lock

#7465625*638*Code# ====> Disables Network lock

*7465625*782*Code# ====> Enables Subset lock

#7465625*782*Code# ====> Disables Subset lock

*7465625*77*Code# ====> Enables SP lock

#7465625*77*Code# ====> Disables SP lock

*7465625*27*Code# ====> Enables CP lock

#7465625*27*Code# ====> Disables CP lock

*7465625*746*Code# ====> Enables SIM lock

#7465625*746*Code# ====> Disables SIM lock

*7465625*228# ====> Activa lock ON

#7465625*228# ====> Activa lock OFF

*7465625*28638# ====> Auto Network lock ON

#7465625*28638# ====> Auto Network lock OFF

*7465625*28782# ====> Auto subset lock ON

#7465625*28782# ====> Auto subset lock OFF

*7465625*2877# ====> Auto SP lock ON

#7465625*2877# ====> Auto SP lock OFF

*7465625*2827# ====>= Auto CP lock ON

#7465625*2827# ====> Auto CP lock OFF

*7465625*28746# ====> Auto SIM lock ON

#7465625*28746# ====> Auto SIM lock OFF

*#*#273283*255*663282*#*#* ====> This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.

*#*#197328640#*#* ====> This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.

On a final note on Tecno Y2 secret code, this is what we have for now. If you know any that are not included in this article, kindly drop it in the comment box below

Related articles:

How to Hard Reset Samsung Galaxy S8

How to Factory Reset Tecno Spark 2 Pro KA7

Infinix Hot 5: How to Hard Reset Infinix Note 5

How to Manually Carryout System Update on Android Phones

You May Also Like

About the Author: Gadgetsright

Adeola (Jasper) is someone who loves everything about technology. He devoted to everything that is tech-related and tries his best to produce useful and quality articles about mobiles, computers and other related products.

Leave a Reply

Your email address will not be published.